AirClean®
Systems portable polypropylene ductless hoods remove toxic particulate,
chemical fumes or vapors protecting both the operator and environment.
Polypropylene fume hoods, standard with a thermally fused integral spill
tray, offer excellent chemical resistance during corrosive applications.
Polypropylene hoods allow for a wide range of
applications. Each polypropylene hood is designed to accommodate up to
7 inches of filtration. By stacking a HEPA filter, followed by a
bonded carbon filter, the operator can effectively remove both toxic
particulate and chemical fumes. For high evaporation or multiple
chemical applications, a full 7 inch stack of chemical filtration may
be recommended.
Polypropylene construction for excellent chemical resistant
properties. The result - “NO MORE RUST” which allows for
longer service compared to standard metal enclosures
Wide range
of activated carbon,
impregnated chemisorptive, and HEPA filters for
containment of virtually any toxic vapor, fume, gas,
and particulate
AirZone™
baffling establishes a proper horizontal airflow pattern and
directs toxins away from the operator in a predictable
pattern, removing “dead spots” within the enclosure
No ducting
required
Integral
vapor-proof fluorescent
lighting
No
installation costs. All AirClean®
Systems bench-top hoods are shipped completely assembled
(filters installed) and ready to use
Available
in 110V or 220V AC versions
AC3000 with clear sides and
back
AC4000 polypropylene hood with AirSafe™
automatic safety controller positioned on a mobile cart.
AC6000 with
vented polypropylene storage cabinet
Our ductless hoods, workstations, and enclosures meet
and exceed relevant OSHA and ANSI Z9.5 standards.
All ductless hoods, workstations, and enclosures
fit perfectly with our line of painted steel laboratory casework,
laboratory carts, and wood laboratory furniture.
Vented and
unvented polypropylene base cabinets
Steel
laboratory cabinets
Stainless
steel laboratory cabinets
Slip hatch
electrical access ports
Polypropylene sink and water fixture
Duplex
electrical outlets
Sturdy
mobile cart
Metal or
stainless steel liner
Polypropylene Ductless Hood
Dimensions
AC3000
AC4000
AC6000
EXTERNAL DIMENSIONS
Width
36"
48"
72"
Depth
30"
30"
30"
Height
56"
56"
56"
INTERNAL DIMENSIONS
Width
35"
47"
71"
Depth
25"
25"
25"
Height
35"
35"
35"
(Folding Sash Version)
AC4000S
with AirSafe™ automatic safety controller and vertical
sliding sash
AirSafe™ automatic safety
controller
Vertical sliding safety glass sash
Dual
wall construction allows for front mounting of services
such as water, gas, or electrical outlets.
Access
to panels on either side of the hood enable field
service of all fixtures.
FlowSmooth™ airfoil on sash lip promotes laminar airflow
Polypropylene construction for excellent chemical
resistant properties. The result - “NO MORE RUST” which
allows for longer service compared to standard metal
enclosures
Wide
range of activated bonded carbon, impregnated
chemisorptive, and HEPA filters for containment of
virtually any toxic vapor, fume, gas, and particle
